|
Drills Available
with Pre-Order
|
Due to the continuing demand I am not able to post any
new drills on the web site. If any of you would
like to pre-order a drill, be aware that waiting time
varies from 36 to 39 weeks. To place an order,
please select a drill from the list below and
send me an email with request. I will reply with
description of the next step. Please include your
phone number and good time to call. |
|
Millers Falls Hand Drill No 2 -1921.
Cocobolo Handles! |

Price: $270.00
Item #: 221-No2-1921
Detailed Description with Photos
Pre-order
Delivery within 36-39 weeks. |
|
Millers Falls
catalog describes this drill as:
Rare tropical wood; malleable iron, black enameled frame; large gear
painted red; other metal parts nickel.
Hollow End Handle, with screw cap, shaped so tool may be used as a
breast drill, and spare bits. Removable side
grip handle. Cut Gears with adjustable friction roll to equalize
bearing. Pinion of Steel, Ball Thrust Bearing. Reinforced
spindle housing.
Chuck of Star pattern with 3 jaws opening with springs, which are
Protected From Injury and Will Not Get Out of Order, and Closing
Evenly on, and Centering Accurately, round shanks from 0 to 3/8 inch
in diameter.
International buyers will receive separate invoice with
additional S&H cost after purchase is complete. |
|
Millers Falls Hand Drill No 2 -1929.
Rosewood/Cocobolo Handles! |

Price: $275.00
Item #: 229-No2-1929
Detailed Description with Photos
|
|
Millers Falls Hand Drill No 2 - 1929 Edition.
Millers Falls
catalog describes this drill as:
Rare tropical wood; malleable iron, black enameled frame; large gear
painted red; other metal parts nickel Plated.
Hollow End Handle, with screw cap, shaped so tool may be used as a
breast drill, and spare bits. Removable side
grip handle. Cut Gears with adjustable friction roll to equalize
bearing. Pinion of Steel, Ball Thrust Bearing. Reinforced
spindle housing.
International buyers will receive separate invoice with
additional S&H cost after purchase is complete.
|
|
Millers Falls Hand Drill No 2 -
1938 edition |

Price: $265.00
Item: 238-No2-1938
Detailed Description with Photos
|
|
This release went into production in 1938 and lasted until
1957, when 2A version was introduced.
Millers Falls catalog No 35 describes this drill as:
Single speed hand drill with two
pinions. Malleable iron frame is enameled black. Drive gear is
painted red. Tropical hardwood main handle with hollow storage
for drill bits and cap. "Chef's cap" side handle. Ball thrust
bearing on spindle. Three-jaw, spring type chuck adjustable
from 0 to 3/8 inch. Bright parts nickel plated. This is
the first year - 1938 - when second pinion was introduced.
Length is 14 1/2 inch. Weight is 2 1/2 lbs.
International buyers will receive separate invoice with
additional S&H cost after purchase is complete.
|
|
Millers Falls Hand Drill No 2 -
1938 edition. Tigerwood Handle. |

Detailed Description with Photos
Price: $275.00
Item: 238-No2-1940 |
|
This release went into production in 1938 and lasted until
1957, when 2A version was introduced.
Millers Falls catalog No 35 describes this drill as:
Single speed hand drill with two
pinions. Malleable iron frame is enameled black. Drive
gear is painted red. Tropical hardwood main handle with
hollow storage for drill bits and cap. "Chef's cap" side handle.
Ball thrust bearing on spindle. Three-jaw, spring type
chuck adjustable from 0 to 3/8 inch. Bright parts nickel
plated. This is the first year - 1938 - when second pinion
was introduced. Length is 14 1/2 inch. Weight is 2 1/2
lbs.
International buyers will receive separate invoice with
additional S&H cost after purchase is complete.
|
|
Millers Falls Hand Drill No. 2A -1957 |

Price: $255.00
Item #: 257-No2A-1957
Detailed Description with Photos
|
|
This release went into production in 1957.
Millers Falls
catalog describes this drill as:
Single speed hand drill with two pinions. Die cast, iron frame
is enameled black. Drive gear is painted red. Tropical hardwood
main handle with hollow storage for drill bits and cap. "Chef's
cap" side handle.
Ball thrust bearing on spindle. Three-jaw,
spring chuck adjustable from 0 to 3/8 inch. Bright parts
nickel plated.
International buyers will receive separate invoice with
additional S&H cost after purchase is complete. |
|